For best results please follow our guidelines.
We accept the following file formats: gif, jpg, zip, psd, sit, tif,
tiff, eps, ai, fh, cdr,qxd, pdf
we do not print from Word documents or Publisher files. They MUST be set up in the formats listed with the correct size, resolution & bleeds.
All file formats must have a minimum of 300 dpi (dot per inch) resolution.
The images designed for the web done at a low screen resolution of 72
dpi. Print images need to be created at
300 dpi or there will be a substantial drop in the image quality.
All color artwork and/or images must be provided in CMYK (cyan, magenta, yellow, black) color mode.
All black & white artworks and/or images must be provided in grayscale color mode.
Heavy black ink might cause smearing.
If you send us RGB files, there is a chance that a color shift may occur and you may not be staified with your job.
THESE COLORS ARE IN RGB
THESE COLORS ARE THE SAME COLORS BUT I CMYK
Please build your press-ready digital files by adding 0 .125" dimension
for business cards, postcards, rackcards,
add 0.125" for all other products.
require ALL files to be built to the full bleed dimension specified
for each trim size.
We automatically trim 0.0625" off of each edge, which will result
in the desired trim size
Simply add 0.125" to the overall dimension of your digital layout.
Example: a 5" x 7" would have a bleed size of
5.125" x 7.125" and a 8.5"x11" flyer would have
a bleed size of 8.625"x11.125". download
It is the portion of the card that will be trimmed off when cut to the
The purpose of a bleed is to continue a color, image or design to the
edge of the card.
Please build your press-ready digital files by adding crop marks.
Lines indicating where the paper should be cut to produce the correct
a. Fonts must be embedded in PDF files.
b. Fonts must be outlined or converted to paths or curves in EPS files.
c. Some fonts have copyright restrictions and will not embed in PDF
d. Quark Express: Fonts and images must be included with all files submitted.
All critical elements (text, images, logos, etc.) must be kept at least
0.125" inside the edge. Anything left close to
edge may be cut off during trimming.
Please allow 1/16" cutting tolerance around your card. We recommend
no borders due to shifting in the cutting
process, borders may appear uneven.
Print Size - 300dpi
with Bleed - 300dpi
After you have finished your files you can upload
them to us using our Upload Center.
Click the link below to send your files.